Evertz 7881IRD2-ATSC
This connector allows you to manage the Evertz 7881IRD2-ATSC card. It communicates using SNMP and has filter polling per card using subtables.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination, by default 161.
- Device address: The slot number of the card in the frame.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Important Note
Full functionality of this connector, with frame status parameters such as temperature and power supply, also requires the Evertz 7X00 Frame Controller connector.
How to use
The element consists of the following pages:
- General: This page consists of parameters such as Card Type, Product Features, Alias, and Proxy Mode.
- Setup: This page consists of various tables and parameters, including the Data Port and Product Features Supported tables, the Product Serial Number, and the License File configurable parameter.
- Input: This page contains the RF Tune table as well as various input-related configurable parameters.
- TS Path: This page contains the ASI Configuration/TS Input Mapping and Status tables.
- TS Output and Filter Control: This page contains various tables including TS Output Status, IP Output Control, and SDL Data Control.
- Decode: This page contains the Decoder, Decoder Audio, Continuity Counter Errors, and Video Monitor tables.
- Video: This page contains the Video Data Control and Video Data Monitor tables.
- Audio: This page contains audio related tables including Audio Decode, Audio Mapping, and Audio Monitor.
- Alarms: This page contains alarms tables: Decoder Alarms, Continuity Counter Alarms, and Demodulator Alarms.
- Traps: This page contains the Traps table and trap-related configurable parameters.