Table of Contents

Evertz 7x00 General Platform - 7746FSEAES8HD

The 7746FS-EAES8-HD HD frame synchronizer is designed to re-time an SMPTE 292M (1080i/60, 1080i/59.94, 1080i/50, 1080p/24sF, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 1035i/59.94, 1035i/60, or 480p/59.94) or SMPTE 259M (625i/50, 525i/59.94 ) input to a local reference tri-level or composite sync signal. When necessary, frames are repeated or dropped to maintain synchronization. During the synchronizing process, the video delay varies from 3 lines through to 1 frame plus 3 lines. Additional delay can be added to the synchronizing process in 1-frame increments.

About

An SNMP connection is used in order to successfully retrieve and configure the information of the device.

This connector is automatically generated by the connector Evertz 7x00 General Platform connector.

Product Info

Connector Version Device Revision
1.0.0.1 Unknown

Installation and configuration

Creation

This connector is used by DVEs that are automatically created by the parent element. No user input is required.

Usage

The element created with this connector consists of the following data pages:

  • General: Displays general information such as Status, Frame Slot and Card Type.
  • Video Control: Displays information about Input Video and Operating Video STD, Vertical Phase, Black Level Adjust, Hue Control, etc.
  • Audio Control: Displays information about Coarse Audio Delay, Fine Audio Delay, Cbit Control, Audio Delay Control Mode, etc.
  • Dolby Control: Contains the Dolby Meta Program Control Table. You can modify the Dialnorm Adjust here.
  • Dolby Monitor: Contains information about Program Count, Configuration and Frame Rate. Also contains the Dolby Metadata Program Monitor Table, where you can monitor parameters such as Bitstream Mode, LFE Channel, Mix Room Type, LT/RT, etc.
  • Headphone Control: Contains information about Headphone Source and Volume.
  • Metadata Control: Contains information about De Embed Line, DID, SID, Monitor Source Select, etc.
  • Metadata Authoring: Contains information about the Program Config. Also contains the Metadata Authoring Program Control Table, which allows you to change the Bitstream Mode, Center Mix Level, Surround, etc.
  • Pair Delay Control: Contains the Pair Delay Control Table, which allows you to change the pair delay.
  • Auto Preset Load Control: Contains information about preset 1 and 2, and about the Detected Preset State.
  • ADF Control: Contains information about Embed Mode, Embed Line, Code, Aspect Ratio, etc.
  • Miscellaneous Control: Contains information about Factory VCR, ACR, VPR and APR Status, etc.
Improve this page