Evertz EMX-FC
The Evertz EMX Frame Controller provides a unified platform for routing digital audio, MADI audio, data, and time code. The EMR uses a packet routing core that allows for highly dense applications and also provides the flexibility for expansion as demand grows.
About
The Evertz EMX-FC connector provides general information about the device and a Faults Table where you can enable or disable traps, and check the status of each fault.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.1.x [Obsolete] | Full connector QA changing IDs and parameter names. | 1.0.0.1 | - |
| 1.0.2.x [SLC Main] | Adds redundant polling. | 1.0.1.2 | Added interface for redundant polling. |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.1.x | - |
| 1.0.2.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.1.x | No | Yes | - | - |
| 1.0.2.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created with this connector consists of the following data pages:
- General: Provides device information, including the Device Description, Device Up Time, Device Contact, Device Name, and Device Location.
- Faults: Contains the Faults Table. The Name column of the table lists the index combined with the monitored device, the Fault column contains the alarm value, Status shows if the alarm is Enabled or Disabled, and the Send Trap column can be used to enable or disable the trap functionality on the device.