Evertz HDSD9545DLY-PRO
The Evertz HDSD9545DLY-PRO is a time-shifting delay processor with two program paths, which are HD- and SD-compatible.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | Yes | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
- Bus address: The bus address of the device.
SNMP Settings:
- Port number: The port of the connected device (default: 161).
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
How to use
The element created with this connector will have 5 data pages.
The General page includes the card type, HDSD9545DLY-PRO or HDSD9545DLY-PRO-HD40.
On the Control Parameters page, you can configure general video/audio parameters, such as Video Standard, Delays, GPI, etc.
The Transition Control and Output Control pages contain info and configurable data for sources or outputs.
The Fault Management page lists the fault statuses indexed by fault name and by input index. Here you can configure whether traps are sent in certain situations.