FOR-A MV-1620HSA Multiviewer
This connector is used to monitor a 3G/HD/SD/Analog Mixed High-Resolution Multi-Viewer (16 Channels, Dual-Screen Output).
About
The MV-1620HSA 3G/HD/SD/Analog Mixed High-Resolution Multi-Viewer from For-A is a multi-viewer that accepts up to 16 channels of mixed 3G/HD/SD-SDI or analog composite signals for monitoring on one or two screens. It can be cascaded with other units to display up to 64 sources at once.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 172.32.65.38.
SNMP Settings:
- Port number: The UDP port, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
Unit
This page displays mv16 Unit Info parameters and mv16 Unit Status parameters.
Input
This page displays mv16 Output Status parameters, as well as the mv16 Input Status Table.