GMIT BMM-810
The BMM-810 is a multiviewer and content monitoring solution for broadcast network and streaming platform operators.
About
This connector allows the total monitoring of the sources and inputs of generic GMIT BMM-810 devices. It provides not only a general overview of the entire system, but also a detailed visualization of all video and audio parameters for every existing input.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device.
- Get community string: The community string used when reading values from the device, by default private.
- Set community string: The community string used when setting values on the device, by default private.
HTTP HTTPConnection Connection
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Device address: The device address, by default ByPassProxy.
Usage
General
This page contains the main general parameters, such as the Description, OID, Uptime, Contact, Location and System Date.
Sources
This page contains a table listing every source and its current status.
Inputs
This page displays a tree control view containing the detailed general information for each input and its respective video and audio modes.
Web Interface
This page displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.