GatesAir Maxiva ULX-OP Logic
The GatesAir Maxiva ULX-OP Logic is the logic controller part of the GatesAir Maxiva ULX-OP liquid-cooled broadcast transmitter.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.5 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No further initialization necessary.
Redundancy
No redundancy is defined for this connector.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
This connector uses SNMP to communicate with the device.
The connector displays both general information about the device and more detailed information related to its power and to the single transmitter. It allows you to configure single transmitter events and configure the priority of these events.
Notes
This connector is part of a group of 3 connectors, which together form the GatesAir Maxiva ULX-OP. As each part of this setup has its own IP address, the connector was split up in 3 parts.