GatesAir Maxiva XTE Exciter
The GatesAir Maxiva XTE Exciter is an exciter that powers over-the-air delivery across the UHF television spectrum.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 06.00.0034 (PCM Software Version) 01.00.0685 (SNMP Version) |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination. The default ports for the device depends on its location:
Slot: Exciter A Port, Exciter B Port
Xmtr #0 : 19617, 19873 Xmtr #1 : 21665, 21921 Xmtr #2 : 23713, 23969 Xmtr #3 : 25761, 26017 Xmtr #4 : 27809, 28065 Xmtr #5 : 29857, 30113 Xmtr #6 : 31905, 32161 Xmtr #7 : 33953, 34209 Xmtr #8 : 36001, 36257
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
With this connector, it is possible to monitor and configure the Exciter cards in the MSC frame. In addition, it is also possible to enable trap notifications.
The communication protocol that is used to get and set the values is SNMP.