GatesAir Maxiva XTE Transmitter
The GatesAir Maxiva XTE Transmitter is a transmitter that powers over-the-air delivery across the UHF television spectrum.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | A05 (release version) 1024 (application software version) |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination. The default port of the device depends on its location:
Slot: Transmitter Port, Exciter B Port
Xmtr #0 : 18593 Xmtr #1 : 20641 Xmtr #2 : 22689 Xmtr #3 : 24737 Xmtr #4 : 26785 Xmtr #5 : 28833 Xmtr #6 : 30881 Xmtr #7 : 32929 Xmtr #8 : 34977
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
The General page displays generic information on the transmitter.
The Transmitter Mode is set to Single Transmitter by default, but you can change this to Dual Transmitter. In that case, the Dual Transmitter information will be polled, and those pages will also become available.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
With this connector, it is possible to monitor and configure the transmitter itself. In addition, it is possible to enable trap notifications and define their priorities.
Based on the Transmitter Mode (Single or Dual), some pages will be hidden or displayed.