Geosync Microwave TLT
The Geosync Microwave TLT is a test translator.
About
This is a serial connector for the Geosync Microwave TLT.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | No |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | R1.01 05/21/15 |
Installation and configuration
Creation
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
- IP port: The port of the connected device, e.g., 23.
- Bus address: The bus address of the connected device. The range is defined from 64 to 95.
Usage
General Page
This page displays parameters such as Attenuation, Control Mode, Reference Frequency Adjustment, etc.
System Info
This page displays alarm parameters and power measurements, such as 12V Power Supply, Power Supply Status, Nonvolatile Memory Status, etc.
Log
This page displays the log table of the device, with the following parameters: Event Number, Date/Time and Event.
Serial Communication
This page displays the current serial communication settings of the device: Address, Baudrate, Parity and Bus Format.