Grass Valley MV-FLEX-32-R
The Grass Valley MV-Flex-32-R is a compact router that offers configurable I/O in any mixture of physical interfaces such as coax, fiber, HDMI, balanced and unbalanced AES and MADI.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Smart Serial Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Direct connection:
- Baudrate: Baud rate specified in the manual of the device, e.g., 9600 (default: 9600).
- Databits: Data bits specified in the manual of the device, e.g., 7 (default: 8).
- Stopbits: Stop bits specified in the manual of the device, e.g., 1 (default: 1).
- Parity: Parity specified in the manual of the device, e.g., No (default: no).
- FlowControl: FlowControl specified in the manual of the device, e.g., No (default: no).
Interface connection:
IP address/host: The polling IP or URL of the destination.
IP port: The IP port of the destination.
Bus address: The matrix number, level number, number of inputs, and number of outputs of the matrix separated by periods (".") The matrix number range is 0-15, the level number range is 0-7, and the range of inputs and outputs is 1-1024.
For example: "0.0.1024.1024".
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The General page contains the general SNMP information of the device.
The other pages are related to the matrix configuration. The information on these pages is updated via the smart-serial connection.
The Matrix Configuration parameter displays any detected misconfigurations. The status OK indicates that the matrix is successfully configured.