Grass Valley RD2000
This connector is designed to support monitoring and configuration of a Grass Valley RD2000 multiformat MPEG-4 receiver. It allows you to select and configure the inputs, audio and video processors and decoders. In addition, a service hunt functionality is also available.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 6.6.1 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The connector supports the following features:
Input selection (ASI and DVB-S/S2) and configuration.
Video and audio processors monitoring and configuration.
Video and audio decoders monitoring and configuration.
Dual (mirrored) SDI or HD-SDI video outputs.
- Two audio decoders on dual units (some units have only one).
Decrypt BISS encrypted transport streams (Mode 1 and Mode E).
Closed caption (NTSC and DTVCC) overlays.
Service hunt functionality.