HP Virtual Connect Flex-10
The HP Virtual Connect Flex-10 connector is an SNMP based connector used to monitor and configure the HP Virtual Connect Flex-10.
About
The HP Virtual Connect Flex-10 provides a monitoring interface for the HP Virtual Connect Flex-10 Switch.
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | Yes |
| 1.0.1.x | DCF integration | Yes | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | Unknown |
| 1.0.1.x | Unknown |
Installation and configuration
Creation
The HP Virtual Connect Flex-10 is an SNMP connector. The IP has to be configured during creation of the element.
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string in order to read from the device. The default value is public.
- Set community string: The community string in order to set to the device. The default value is private.
Usage
General Page
The General page displays the general information of the device, for example Product Name, System Uptime. Some of these parameters can also be changes, like for example the System Contact...
Detailed Interface Info Page
This page presents a table with information with Detailed Interface Info.
Detailed Interface Info - Rx Page
This page presents a table with information with Detailed Interface Receiving Info.
Detailed Interface Info - Tx Page
This page presents a table with information with Detailed Interface Transmitting Info.
VLan Page
This page presents a table with information regarding the Ethernet Network.
Profile Table Page
This page presents tables with information regarding Profiles and Profile Network Mapping.
Web Interface
This page show the device Web Interface.
Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.