Table of Contents

HW Group Temp-232

About

The HW Group Temp-232 connector integrates DataMiner with the HW Group Temp-232 temperature sensor over a smart-serial link (auto‑report mode). It exposes a real-time temperature measurement with 0.1 °C resolution and supports alarm monitoring and trending.

Key Features

  • Smart-serial auto-report ingestion (no polling or commands required).
  • Real-time temperature updates.
  • Alarm monitoring based on parameter thresholds.
  • Simple setup for direct RS-232 or serial-over-IP gateways.

Use Case

Challenge: Monitor ambient temperature in technical rooms, racks, or enclosures from one central location.

Solution: Deploy the HW Group Temp-232 connector to monitor temperatures via DataMiner, and configure alarms on temperature limits to get notified automatically in case of issues.

Benefit: Early detection of thermal issues to prevent outages and enable faster incident response.

Technical Reference

Prerequisites

  • DataMiner version 10.3.0.0 - 12752 or higher.
Note

For detailed technical information, refer to our technical documentation.

Improve this page