Table of Contents

Harmonic NSG9000 40G Technical

About

The Harmonic NSG 9000-40G is a high-density universal edgeQAM (EQAM) system designed to serve as a digital video gateway for cable operators. It multiplexes on-demand content over IP networks and is capable of reaching up to 648 QAM-RF output transport streams.

The Harmonic NSG9000 40G is an HTTP connector designed to provide comprehensive control and monitoring for the Harmonic NSG9000 40G EdgeQAM device.

Configuration

Connections

HTTP Connection – HTTP Main Connection

This connector uses an HTTP connection and requires the following input during element creation:

HTTP CONNECTION:

  • IP address/host: The polling IP or URL of the destination.
  • IP port: The port of the destination.
  • Bus address: If the proxy server has to be bypassed, specify bypassproxy.

Initialization

The NSG9000 devices have a default authentication setup that requires login details for a session. These details should be entered on the Authentication Settings subpage of the General page. These default login details can be different depending on the device type, and consequently they are different for the NSG9000 3G version.

  • Username: The username or login of the corresponding access level.
  • Password: The password of the user or access level.

Web Interface

The web interface is only accessible when the client machine has network access to the product.

How to Use

Alarm

On the Alarm Storm Prevention subpage, you can configure the parameters for alarm storm prevention.

CAS Settings

The ECM Group Table lists the ECM groups. To delete one or more rows, set the value in the Delete ECM column to true and then click the Delete Selected button below the table. To add a row, use the Add ECM subpage, enter new values, and click the Set ECM button.

Note

When you edit, add, or remove rows, you may need to wait some time for each action to be synchronized. Otherwise, if new changes are received in the element before the updates, the previous changes might be lost.

ECMG

On this page, you can find the communication parameters sent to the ECMG. Up to 10 ECMGs are supported.

Note

The row must be active for the settings to be saved. The NSG9000 clears inactive rows.

Overview

A tree view sorts all the QAMs by RF and Module. If you select an element, the status parameters are shown on the right. A list of the sub-elements and their information is shown at the bottom.

Improve this page