Harmonic ViBE CP9000
About
The Harmonic ViBe CP9000 is a contribution encoder that preserves video quality at the front of the broadcast chain by processing uncompressed UHD signals.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | - Monitoring. - Configuration of the device. |
- | - |
| 1.0.1.x | - Monitoring. - Configuration of the device. |
1.0.0.2 | The display key of the Alarms table and Sub System Info table has changed. |
| 1.0.2.x [SLC Main] | HTTP connection. | 1.0.1.6 | - Existing elements need to be reconfigured before the new connection(s) will be taken in use. - Ensure that your encoder's firmware is 2.1-ed-A or above. |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.0-ed-A |
| 1.0.1.x | 2.0-ed-A |
| 1.0.2.x | 2.1-ed-A |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.0.1.x | No | Yes | - | - |
| 1.0.2.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
HTTP Secondary connection
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP of the device.
- IP port: The port to communicate with the API.
- Bus address: By default bypassproxy.
Web Interface
The web interface is only accessible when the client machine has network access to the device.
How to Use
General
This page contains product information, such as the System Name, System Description, and Serial Number. It also displays the primary and secondary alarm output status.
Authorization
You will need to provide the credentials required for HTTP communication.
HW/SW Info
On this page, you can monitor the Board Info, Software Licenses, and Inventory Info tables.
Alarms
This page contains the following tables:
- Sub System Info: Lists alarms related to one chassis function and one function-encoding channel.
- Alarms: Lists the alarms that are present on the device.
Events
This page contains a table with information regarding events for which the operator should be notified, such as alarm that have been raised or dropped.
IP
On this page, the IP Interfaces table lists all external IP interfaces.
Maintenance
On this page, you can find configurable parameters such as BCAST Status and Transfer Buffer Max Size. Two buttons are available, Reboot and Shutdown, which allow you to execute the corresponding actions on the device.
Presets
This page contains a read-only table listing the previously saved configurations.
Traps
On this page, the Manager Table displays the configured trap destinations.
Encoder Services
This page displays the encoded services and their components.
Device configuration can be done through some of the provided tables.
Encoder Video
This page displays the video components of the encoded services.
Device configuration can be done through the provided tables.
Encoder Input Audio
This page contains the input configurations for the audio components of the encoded services.
Encoder Output Audio
This page contains the output configurations for the audio components of the encoded services.
Device configuration can be done through the provided table.
Encoder SCTE-35
This page displays the SCTE-35 components of the encoded services.
Device configuration can be done through the provided table.
SMPTE2022-6 Subscriptions
This page displays the SMPTE2022-6 subscriptions of the encoded services.
Device configuration can be done through the provided table.
Transport Stream Outputs
This page displays the transport stream outputs of the encoded services.
Device configuration can be done through the provided tables.
Polling
You can set the polling configuration for the decoder's SNMP data.
Alarm Custom Definition
You can set custom names for alarms based on their identifier and name.