Harris Matrix Telnet
The Harris Matrix Telnet is a matrix HD-SDI video router.
This connector uses a smart-serial connection to communicate with the Harris Matrix device over Telnet.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Serial main connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
Interface connection:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Bus address: The bus address of the device, by default 0 (range: from 0 to 15).
Initialization
To make sure information can be retrieved from the device, log in on the General page of the element. When the Logged In status parameter shows "Yes", the login has been successful.
How to use
General
On this page, you can connect to the device by logging in. This page also displays the Logged In status and the Level Dimensions, and it allows you to Restart the device.
Inputs/Outputs
This page contains the Outputs and Inputs tables. These allow you to change the names of the outputs/inputs and to connect/disconnect an output to an input.
Note: The input/output label names have to be unique, as otherwise the name change will not work.
Matrix
This page displays a matrix that clearly shows the connected inputs and outputs. It also allows you to connect or disconnect inputs/outputs.
Note: The dimensions of the matrix will scale to the dimensions of the level visible on the General page.