Harris ULX-5000AN
The Harris ULX-5000AN is an analog television transmitter. It uses a simplified control system that minimizes the number of microprocessors.
About
This connector can be used to monitor and configure the Harris ULX-5000AN system.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
SNMP settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string in order to read from the device. The default value is public.
- Set community string: The community string in order to set to the device. The default value is private.
Initialization
No extra configuration is needed.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created using this connector consists of the data pages detailed below.
General
This page displays system information, including the System Time, System Description, System Location, System Contact, System Up Time and other general parameters.
Transmitters
This page is divided in four sections: System, Driver Chain, Power and Output Configurations. It displays among others the Device Name and Model Number, and allows you to monitor the Transmitter, Driver Chain and Output Status, as well as switch the exciter.
There is also a page button in the System section, which allows you to enable/disable the traps in the Harris ULX-5000AN.