Hiltron HCS4
The Hiltron HCS4 is a unit controller that can manage different types of modules: DBT modules, power supply modules, etc.
The connector retrieves information about all the modules using the SNMP protocol.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 0.10 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - Hiltron HCS4 - Double Bias Tee - Hiltron HCS4 - PSA Power Supply - Hiltron HCS4 - SWI Waveguide Switch - Hiltron HCS4 - L-Band 2+1 Redundancy Switch - Hiltron HCS4 - LNB |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default:161).
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The list of modules managed by the connector can be found in the Modules table on the General page.
This connector will export different connectors and create DVEs based on the retrieved modules. You can find a list of the supported modules in the "System Info" section above.