IMP Telekom DVB-T Transmitter
This connector monitors and configures the IMP Telekom DVB-T Transmitter Unit.
About
The IMP Telekom PAP-D protocol gets and sets the changeover configuration between several transmitters. The protocol uses SNMP (including traps) to retrieve data.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | V3.65 |
Installation and configuration
Creation
SNMP main connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP Connection:
- IP address/host: The polling IP of the device, e.g., 10.11.12.13.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device. The default value is public.
- Set community string: The community string used when setting values on the device. The default value is private.
Usage
General
This page contains most of the configurable parameters and general information.
Event Config
On this page, events can be enabled.
Event Priority
On this page, the priority for events can be set.
Webpage
This page contains the linked web interface of the device.
Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.