IRT DVB-T2 TX
This connector is used to monitor and configure an IRT DVB-T2 TX device. The IRT DVB-T2 TX is a DVB-T2 transmitter.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device. By default 161.
- Set community string: The community string used when setting values on the device. By default 161.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The connector displays 9 pages.
This General page displays generic information about the connector (Name, Location, etc.).
The exciter settings can be configured on Exciter A and Exciter B.
The transmitter settings can be configured on the pages Main Transmitter, Reserve Transmitter, Transmitter A and Transmitter B.