ITNM Systems IDM100 General
This connector is used to retrieve the transport streams and the services from the transport streams from the ITNM Systems IDM100 analyzer, and to display information about the services. The connector uses a serial connection to send HTTP commands to the device.
About
This connector sends HTTP commands to the IDM100 over a serial connection. The connector only polls the transport streams of the ITNM Systems IDM100.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 2.0.0.x | Integration of previous version. | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 2.0.0.x | Unknown |
Installation and configuration
Creation
Serial Main connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
- Direct connection:
- Baudrate: Baudrate specified in the manual of the device.
- Databits: Databits specified in the manual of the device.
- Stopbits: Stopbits specified in the manual of the device.
- Parity: Parity specified in the manual of the device.
- FlowControl: FlowControl specified in the manual of the device.
- Interface connection:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
- Bus address: The bus address of the device.
Usage
General
This page displays general information about the device.
It also contains the Polling Status, including the status of the entire polling process, the number of sent and received Stream Commands and the number of sent and received Service Commands.
Transport Streams
On this page, the Transport Streams table contains an entry for every transport stream in the system.
Stream Services
This page displays general information about each transport stream, such as the Stream Name, Stream Bandwidth, etc.
Stream PIDs
This page displays the Transport Stream PIDs table. This table has an entry for each PID in each transport stream.
Service PIDs
This page displays the Service PIDs table. This table has an entry for each PID in each service available in the system.
Audio / Video Service
This page displays 2 tables: Audio PIDs and Video PIDs. The audio PIDs from each service are displayed in the Audio PIDs table, while the video PIDs are displayed in the Video PIDs table.
PCR / PTS / DTS Service
This page contains extra information about the errors and performance of the service.
It also contains the General PCR / PTS / DTS Table, which displays general information about each service.
Web Interface
This page displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.