Innotech IG04
This connector can be used to communicate with an Innotech IG04 weather station device. The BACnet/IP protocol is used to communicate with the device.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.6.75 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
Virtual Connection
This connector uses a virtual connection and does not require any input during element creation.
Initialization
The Device Address parameter on the General page must be filled with the IP address and UDP port of the device, in the format <IP address>:<port> (e.g., 192.168.1.10:47808).
Once this parameter has been filled in correctly, the element will start polling the device.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The General page displays configuration parameters like the Device Address, Voltage, etc.
The Status page displays the weather parameters, such as Temperature, Wind, Pressure, etc.