JDSU PVM RSAM 5800
With this connector, it is possible to monitor JDSU PVM RSAM 5800 devices with SNMP.
About
The JDSU PVM RSAM 5800 will monitor the JDSU PVM RSAM 5800 Video Monitor using the HTTP protocol.
When SNMP traps are received, the element will update the corresponding tables.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | Yes |
| 2.0.0.x | Branch version based on 1.0.0.x (see below) | No | Yes |
| 2.1.0.x | New firmware based on 2.0.0.x (see below) | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | VSA Monitor API version 2.6 |
| 2.0.0.x | VSA Monitor API version 2.6 |
| 2.1.0.x | VSA Monitor API version 3.1 |
Installation and configuration
Creation
This is an HTTP connector. The IP and port need to be configured during creation of the element. An SNMP connection is needed to receive traps.
HTTP Main connection
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination. By default 80.
- Bus address: If the proxy server has to be bypassed, specify bypassproxy.
SNMP Traps connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General Page
This page displays information about the PVM device.
Test Point Page
This page displays a table with information about the RSAM Test Points.
Channels Page
This page displays a table with information about the monitored channels.
Programs Page
This page displays a table with information about the monitored programs.
Overview Page
This page displays a tree view with the test points as the root.
Web Interface Page
This page displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.