Juniper Networks EX3400
The Juniper Networks EX4300 connector is an SNMP-based connector used to monitor and configure the Juniper Networks EX4300.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
- Port number: The port of the connected device, by default 161.
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product. Note that this interface should be enabled first on the device.
How to use
Several important settings can be found on the Configuration page, which allow you to enable/disable the polling of several tables. Those tables, located on other pages of the connector, contain different functional information about the device.
There is also an import/export file feature available on the Operating States page. Import makes it possible to set described data from the file into the desired table. Via export you can create a file that contains all the table data. Before you can execute an import or export, you first need to fill in the file name and the file path.
On the Virtual Chassis page, beneath Chassis, you can find the software version of the device, which can be useful to know in some cases.