Juniper Networks EX4300
The Juniper Networks EX4300 connector is an SNMP-based connector used to monitor and configure the Juniper Networks EX4300.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product. Note that this interface should be enabled first on the device.
How to use
General Page
This page contains some general information about the device.
System Health Page
The three tables on this page provide monitoring for temperature, memory and CPU load.
Operating States Page
Three tables display the operating states of the different components of the device.
This page also provides the possibility to import/export monitoring configuration.
Chassis Page
This page provides information about the different containers and contents of the device.
Configuration Page
This page provides configuration parameters to enable or disable polling of various tables. It also displays some information about configuration events.
Alarms Page
This page provides information about the yellow and red alarms.
Interfaces Page
This page contains the Interface Table. It also provides the option to choose the naming format used to identify interface in all 4 tables, including those that are accessible via the page buttons.
The Interface poll table provides the option to enable or disable polling for each interface.
IP Page
Different monitoring parameters concerning IP can be found on this page.
VLAN Page
The tables on this page provide monitoring and configuration parameters for everything related to VLAN.