Kathrein FSKMTS 10
Kathrein FSKMTS 10 is an FSK Management Termination System used to send commands to amplifiers on the network that are only able to receive FSK commands. In order to be able to send FSK commands to the amplifiers, a list of the amplifiers managed by the given HEC must be loaded. This list is also called the "node list". This connector can be used to import the node list into the device and show an overview of the nodes.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.1 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection - Main
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to Use
The General page of this connector displays information about the modules.
On the RMTS Information page, you can configure device settings.
On the Import Configuration page, you can manually import a node list and configure the settings for automatically importing the node list from a directory. Importing from both local directories and network locations is supported. When importing from a network location, it is important to specify the Network Username, Network Password, and Network Domain.
The Nodes page contains all information about the nodes and can be used to add, edit, or delete nodes. Note that when a node is added, it is possible that the Hardware Type or Alias may not be immediately shown correctly in the table because the device needs a bit of time to process this.