Kronback Tracers B16
The Kronback Tracers B16 is capable of measuring up to 256 return path signals (5 - 65 MHz), and allows the spectrum to be viewed by an unlimited number of concurrent users. For small-sized headends, the B16 can be delivered with a buy-per-input license.
About
This connector displays the spectrum analyzer UI for the Kronback Tracers B16.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | No |
| 1.0.1.x | Several adjustments and added functionality | No | No |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.1.x | Unknown |
Installation and configuration
Creation
Serial Main Connection
This connector uses a serial connection and requires the following input during element creation:
SERIAL CONNECTION:
- Direct connection:
- Baudrate: Baudrate specified in the manual of the device.
- Databits: Databits specified in the manual of the device.
- Stopbits: Stopbits specified in the manual of the device.
- Parity: Parity specified in the manual of the device.
- FlowControl: FlowControl specified in the manual of the device.
- Interface connection:
- IP address/host: The polling IP of the device.
- IP port: The IP port of the device.
Usage
Device Info
On this page, the parameter SW Offset can be used to specify a security level so that only users with a sufficiently high security level can set the spectrum parameters.
Spectrum Analyzer
This page displays the spectrum trace according to the configured settings, i.e., the Reference Level, Start Frequency, Stop Frequency, Frequency Span, Center Frequency, Input Attenuation and # Trace Points.