Kronback Tracers X16
The Kronback Tracers X16 is a spectrum connector that polls and displays real-time and history spectrum analysis. It polls the device over a serial connection.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 1.9.8 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
HTTP Connection - Main
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 80).
- Device address: The bus address of the device. If the proxy server has to be bypassed, specify BypassProxy.
SNMP Connection - Info
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string is used when reading values from the device (default: public).
- Set community string: The community string is used when setting values on the device (default: private).
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
Spectrum Analyzer
On this page, you can configure the spectrum analyzer and view the same real-time trace as would be visible on the analyzer itself.
Device Info
This page displays the Serial Number, Firmware, FPGA, and Hardware version. It also allows you to edit the trace settings parameters.
Channel
Here you can select Active Input from the available channels and specify the Compensation Level to add to the trace.