LCJ Capteurs CV7-S
The CV7-S is an anemometer, used for measuring wind speed and direction.
The CV7-S connector collects absolute parameters and average parameters over a period of 1, 10 and 20 minutes.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | EW_6_4s3_FR - 6.4 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: 161
- Bus address: The bus address of the device.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
How to use
The connector displays all data on the Monitoring page.
Notes
The average temperature parameters are not polled from the device, but calculated by the connector. If the timer base is changed, the period over which the averages are calculated will not match the displayed period (e.g., 10 and 20 min).