Maxbert PDU
This is an SNMP connector that monitors a Maxbert power distribution unit with monitoring capacity for 6 sockets.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2019.02.04 (MAX9 EN) |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: Default:161.
SNMP Settings:
- Get community string: Default: public.
- Set community string: Default: private.
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The element created with this connector has one General data page, which contains:
- On the left, general system information parameters such as System Description, Name and Location.
- On the right, the measured current for each socket and all phase states for each phase. If a temperature sensor is available, the temperature is also displayed.