MediaKind RX8320
This is an SNMP connector that shows the status of the different parameters of the MediaKind RX8320 IRD (Integrated Receiver Decoder).
The MediaKind RX8320 is a very versatile piece of equipment. It comes in many different configurations, with input options varying between satellite and ASI, and output options including ASI, satellite, and IP.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version. | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | SW Version 8.36.1 (Bank 1) |
Version Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
The connector uses SNMP retrieval to poll all of its parameters.
The Status page gives an overview of the main parameters from the other pages, so that you can find the most important status information summarized on this page.
The Alarms page contains the main parameters for monitoring.
The connector mirrors the web UI of the device, with the exception of a few parameters that were not exposed via SNMP in the initial development.
Traps are not yet implemented in this initial version.