Meridian II Precision TimeBase
The Meridian II Precision TimeBase is a modular, network-centric, time and frequency standard module that provides precise and stable, GPS-synchronized time and frequency output.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Implemented SNMP parameters for meridianGPS sub-tree (1.3.6.1.4.1.13827.10) | - | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination
- IP port: The IP port of the destination. Default value: 161.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product. The web interface is not compatible with Internet Explorer.
How to use
The element created using this connector consists of the data pages detailed below.
General
This page displays system information, including the System Time, System Description, System Location, System Contact, System Up Time and other general parameters.
Interfaces
This page displays information on the interfaces, such as the operational state and the traffic going through the interfaces.
Storage
On this page, you can monitor the status of the storage (e.g., the size available per partition).
NTP
This page displays all information related to the Network Time Protocol (NTP) module of the device.
Receiver
This page contains information related to the GPS subsystem/receiver.
Clock/Daylight Saving Time
This page contains the daylight saving time configuration for the Meridian II Precision TimeBase. It allows you to define when daylight saving time will start and end each year.
Fault
This page lists all possible system faults of the device. The following types of faults are covered:
- Flash
- FPGA
- Signal
- DAC
- Antenna
- Polling Events
- Time Reference
- GPS Engine
- Primary Redundant Power Supply
- Secondary Redundant Power Supply
Oscillator
This page displays the system oscillator control information for the GPS subsystem.
CPU Options
This page displays information about the CPU options configured in the device.
Plug-In Options
This page displays any installed plug-in modules and their settings.