Mier Comunicaciones 50N0176 MTDT
This connector can be used in combination with a Mier Comunicaciones 50N0176 MTDT transmitter.
About
With this connector, it is possible to monitor and configure the transmitter itself, as well as to enable the trap notifications and their priorities.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | No |
| 2.0.0.x | Branch version based on 1.0.0.x | Yes | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | Unknown |
| 2.0.0.x | Unknown |
Installation and configuration
Creation
SNMP main connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP Connection:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Configuration
Once the element has been created, go to the System page and update the Poll parameter to make the connector poll the device.
To enable the LITE functionality of the connector, go to the Network Settings page, and enable the parameter Lite Protocol.
Usage
System
This page contains system-critical parameters, such as MUX State, Poll and IP Config.
Remodulator
This page displays transmission parameters, such as MUX1 Transmission Mode.
Mux Data Trap Config
This page contains a list of MUX Digital Input traps. It is possible to configure these.
Rack Data
This page contains parameters that display the physical state of the rack.
Rack Data Trap Config
This page displays the Analog Input traps from the rack, as well as the rack's Digital Input Traps and its Digital Output Traps. It is possible to configure these.
GPRS Data
This page displays state and configuration parameters for GPRS.
MC Data
This page displays configuration parameters for MC Data.
MC Data Trap Config
This page displays the traps for each channel of the device. It is possible to configure these.
GPS Data
This page displays state and configuration parameters for GPS.
GPS Data Trap Config
This page displays configuration parameters for traps about GPS states.
Network Settings
This page contains the Lite Protocol toggle button.