Mikrotik RouterOS
This is an SNMP connector that is used to monitor and configure the Mikrotik Router equipment.
About
This connector retrieves the information on tables and parameters via SNMP polling.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | - |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General
This page contains basic information about the device, such as the Model, Serial Number and System Up Time.
It also displays more specific information about the router, including the Voltage, Temperature and Fan Speed.
You can also reboot the device here and turn off the USB Power.
Detailed Interface Info
This page displays a table containing the Bandwidth Speed, Total Utilization, MTU, Last Change, and the number of Errors In and Out.
Detailed Interface Info - Rx
This page contains the Rx Table, which displays Bitrate Calculations, Bitrate Percent, Total Packets, Packet Rate, Discarded Packets, Too Long, Align Errors and Unknown Packets.
Detailed Interface Info - Tx
This page contains the Tx Table, which displays Bitrate Calculations, Bitrate Percent, Total Packets, Packet Rate, Discarded, Too Short, Pause and Received FCS Errors.
Wireless Interfaces
This page contains four tables related to the device: Station Mode, Registration, Access Points, and Wireless CAPSMAN.
Neighbor Table
This page displays the Neighbor Table, with the Platform (name), IP Address, Mac Address, Version, Identity and Software ID.
Partition Table
This page contains a table that shows if the device is partitioned in any way. The table shows the Size of the partition in MB, the Version, Partition Status and the Partition State.
Web Interface
This page displays the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.