Miranda IControl General - XVP-3901

The Miranda IControl XVP-3901 is a video processor. The connector to monitor this device is automatically generated by the connector Miranda IControl General, range 2.0.0.x or 3.0.0.x.

About

Product Info

Range	Supported Firmware
2.0.0.x	-
3.0.0.x	-

Configuration

This connector is used by DVE child elements that are automatically created by the parent connector Miranda IControl General, from version 2.0.0.x onwards.

Usage (Range 2.0.0.x)

General

This page displays general information, such as the Overall Status and Card LED, as well as general switch statistics.

Audio

This page displays statistics regarding the Signal Channels.

Fixed Delay

This page displays Channel Coarse statistics.

Fine Delay

This page displays Channel Fine statistics.

Input/Output

This page displays statistics for Input/Output, all Gain and Vertical HD.

Levels

This page displays Level Channel statistics.

Presence

This page displays statistics for Format Selected and Source Selected.

Usage (Range 3.0.0.x)

Audio Processing

This page displays the Groups and Discrete AES Detected. There are page buttons to the Signal Presence subpage, the Downmix subpage, and 8 CH channels subpages (each containing four different channels). Several parameters can be configured on these pages, such as the downmix Operation Mode, Dialnorml, LFE, etc., and the signal Levels, Phase, Mute, Coarse, Fine, etc.

Video Input/Output

This page displays information regarding the Video Input/output, such as Input Select, Input Configuration, BNC configuration, Fiber Configuration, Freeze, Deglitcher, and Input 2 Mode.

Video Outputs

This page displays the 3G/HD and SD Output Format, Aspect Ratio, and AFD Mode.

Video Processing

This page displays Video Processing statistics, such as Proc Mode and RGB Gamut Mode.

RGB Settings / YCbCr Settings

Depending on the video processing Proc Mode configuration, the element will contain either the RGB Settings or the YCbCr Settings page.

These pages allow you to configure basic parameters such as the Y Gain, Chrominance Gain, Black Offset, and Hue (for YCbCr) or G Gain, B Gain, R Gain, G Offset, B Offset, and R Offset (for RGB).

Logging (Version 3.0.2.20 only)

This feature is only available in version 3.0.2.20 of the connector. It has been discontinued in subsequent versions. This page displays logging for the SCTE104 parameter. Polling for this element can be toggled on or off in the main element.

Note: Make sure that the XVP-3901 DVE is licensed to poll these parameters.