Miteq NSU2-C

The MITEQ NSU2-C/C23823 improves reliability for advanced satellite communications systems. The NSU2-C system consists of an NSU2 Control Unit, Switch Modules, and fiber-optic transmitters and receivers.

The NSU2 Control Unit monitors the status of each of the fiber-optic receivers and the fiber-optic transmitters. When a fault is detected on any component in a primary path, the defective path is automatically placed into standby, and the backup path is placed online using the switch modules.

About

Version Info

Range	Key Features	Based on	System Impact
1.0.0.x [SLC Main]	Initial version.	-	-

Product Info

Range	Supported Firmware
1.0.0.x	-

System Info

Range	DCF Integration	Cassandra Compliant	Linked Components	Exported Components
1.0.0.x	No	Yes	-	-

Configuration

Connections

SNMP Connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

• IP address/host: The polling IP or URL of the destination.
• IP port: The IP port of the destination.
• Bus address: The bus address of the device.

SNMP Settings:

• Get community string: The community string used when reading values from the device (default: public).
• Set community string: The community string used when setting values on the device (default: private).

Initialization

No extra initialization is needed.

Redundancy

There is no redundancy defined.

Web Interface

The web interface is only accessible when the client machine has network access to the product.

How to Use

The device information can be found on the General and System pages.

The Alarms page contains all alarm indicators regarding the power supplies and faults.

The Status Indicators page contains all alarm indicators regarding the switch positions.

The Converters page contains an overview of the most recent converter readings, enabling the monitoring of the polarization, gain, frequency, and attenuation.