Motorola DSR-4410MD
The Motorola DSR-4410MD is a powerful digital headend product, capable of simultaneous decryption of up to 64 services. With advanced modulation support, the DSR-4410MD can output a full transport multiplex with both MPEG-2 and/or MPEG-4 services at an information rate of up to 160 Mbps.
About
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x | Initial version | - | - |
| 1.1.0.x | Firmware update | 1.0.0.1 | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | |
| 1.1.0.x |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Configuration
Connections
SNMP Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION - Main Connection:
- IP address/host: The polling IP or URL of the destination.
- Device address: Not required.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
How to use
The data is retrieved from the device using SNMP.
On the General page of the element, you can find general information about the device. In the event that the device needs to be restarted, you can use the Reset IRD button on that same page.
The connector also retrieves other relevant information from the device and displays it on the respective pages, such as Audio & Video, Input Ports & Tuning, Channel & Signal, Diagnostics, Retune Monitoring, and IP Connections.
Each of these pages contain configuration parameters that you can use to change specific settings of the device.