Motorola GX2-CM100 B - GX2-DRR-2X85
The Motorola GX2-CM100 B - GX2-DRR-2X85 connector is an SNMP-based connector used to monitor and configure the Motorola GX2-DRR-2X85.
About
This connector provides a monitoring interface for the Motorola GX2-DRR-2X85 module.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 2.0.1.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 2.0.1.x | E |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 2.0.1.x | No | Yes | - | - |
Installation and configuration
Creation
This connector is used by DVE child elements that are automatically created by the parent connector Motorola GX2-CM100 B, from version 2.0.1.1 onwards.
Usage
General
This page displays general information about the card, including the Unit Name, Module Type, Firmware and Hardware Version, IP Address and Physical Address.
Optical Receiver
This page displays the parameters Optical Power, Mode, 12V Current, Attenuator, Switch Mode, Threshold, Factory Default, Temperature, Fan Current and Wavelength.
Alarms
This page contains all Status parameters.
Factory
This page displays CRC Parameters, Flash Banks and Flash Counters.
Web Interface
This page displays the webpage of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.