Motorola GX2-CM100 B - GX2-PSAC10D-R
The Motorola GX2-CM100 B - GX2-PSAC10D-R connector is an SNMP-based connector used to monitor and configure the Motorola GX2-PSAC10D-R.
About
This connector provides a monitoring interface for the Motorola GX2-PSAC10D-R module.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 2.0.1.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 2.0.1.x | G |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 2.0.1.x | No | Yes | - | - |
Installation and configuration
Creation
This connector is used by DVE child elements that are automatically created by the parent connector Motorola GX2-CM100 B, from version 2.0.1.1 onwards.
Usage
General
This page displays general information about the card, including the Unit Name, Module Type, Firmware and Hardware Version, IP Address and Physical Address.
AC Power Supply
This page displays the parameters Fan Current, 12V Backplane, 3.7V Backplane, Heatsink Temperature, 5V Anode, 3V Anode, 12V Anode, Temperature and 5.1V Backplane.
Alarms
This page contains all Status parameters.
Factory
This page displays CRC Parameters, Flash Banks and Flash Counters.
Web Interface
This page displays the webpage of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.