Motorola GX2-DRR-4X
The Motorola GX2-DRR-4X connector is an SNMP-based connector used to monitor and configure the Motorola GX2-DRR-4X.
About
This connector provides a monitoring interface for the Motorola GX2-DRR-4X chassis.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | No |
| 2.0.0.x | DVE focused | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 2.0.0.x | B |
Usage
General
This page displays general information about the card. Unit Name, Module Type, Firmware and Hardware version, IP Address and Physical Address are some of the parameters that can be found on this page.
Digital Receiver
This page displays the parameters Channels Attenuation (A - D), Trippoint Level, Trippoint Mode, Optical Current, Fan Current, 12V Current, Temperature and Factory Default Reset.
Alarms
This page contains all the Status parameters.
Factory
This page displays CRC Parameters, Flash Banks and Flash Counters.
Web Interface
This page displays the webpage of the device.
Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.