Motorola GX2-RX200BX2
The Motorola GX2-RX200BX2 connector is an SNMP-based connector used to monitor and configure the Motorola GX2-RX200BX2.
About
This connector provides a monitoring interface for the Motorola GX2-RX200BX2 chassis.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | No |
| 2.0.0.x | DVE focused | No | Yes |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | Unknown |
| 2.0.0.x | D |
Usage
General
This page displays general information about the card. Unit Name, Module Type, Firmware and Hardware version, IP Address and Physical Address are some of the parameters that can be found here.
You can also configure additional information here, such as the Return Rx Path name and Location. If the device is configured to detect its IP neighbors, their IP will be displayed with the parameter Rx Neighbor 1 IP Address.
Optical Receiver
This page displays the following read-only parameters: Temperature, Fan Current, Current 12V and Optical Power. It also contains the following configurable parameters: Mode, Wavelength, Attenuator, Switch Mode, Threshold and Factory Default Reset.
Alarms
This page contains all the Status parameters. If an alarm is detected, the parameter will change from OK to ALARM.
Factory
This page displays CRC Parameters, Flash Banks and Flash Counters.
Web Interface
This page displays the webpage of the device.
Note that the client machine has to be able to access the Http server of the device, as otherwise it will not be possible to open the web interface.