Motorola SE-4150
The Motorola SE-4150 is an Encoder.
About
This connector communicates using SNMP Protocol.
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x | Initial version | No | No |
Product Info
| Range | Supported Firmware Version |
|---|---|
| 1.0.0.x | 3.3-9 |
Installation and configuration
Creation
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default: public.
- Set community string: The community string used when setting values on the device, by default: private.
Usage
System Monitor
This page contains monitoring information about the system.
It allows the user to set: Operational State, Alarm Status and System State.
It displays: Encoder Version, IP Bonding Info and Video/Audio/Mux/Transport Current Bitrate.
It also displays the table: Input Mpts Table.
Network Settings
This page allows the user configure the network settings on the device.
It allows the user to set: Host Name, NTP Server IP Address, System TTL, Backup NTP Server Address and TS1/TS2: Current Destination Address, Current Format, Current Interface, Current Destination UDP Port, Current Destination Physical Address.
It displays: Encoder IP Address, Equipment Type, Gateway IP, Subnet Mask and Eth0/Eth1/Eth2/Eth3: IP Address, Subnet Mask, Gateway IP Address.
It also contains a page button to: TS and Virtual IF Tables.
System Configuration
This page contains configuration parameters for the system.
It allows the user to set: Local Or Control, Redundancy Role, Restore Defaults, Toa Clock, Toa Clock Time, Session Number, Session Status, Current Primary ID, Current Preset Extra Row Offset, Current Preset Extra Row Count, Current Conf Num.
as well as: Current Conf Name, Save Conf, Name, Redundancy Group ID, and Redundancy Group Name.
It displays: UTC Date and Time, Config Filename List, Current Conf Count, and Current Conf DB Out of Sync.
It contains a page button to: Auto Restore Config.
Service Provision
This page contains tables which hold information about the services provisioned.
It also allows the user to set: ASI Program Number and Internal Source Image Number.
It displays: Service Table, VBI Table, DPI Table, Stat Mux Table, Input Tuner Table, Ancillary Data Table and Internal Source Table.
Identity
This page contains identity information about the device.
It allows the user to set: Inventory Code, Location Area, Location Shelf, Command and Description.
it displays: Serial Number, Chassis Number, IF Index, Hardware Features, Software Version, MIB Version, Agent Version, Unit Model, License Feature list and License Version.
It contains a page button to: IF Extension
State
This page contains information about the state of the device
It allows the user to set: Administrative State, Procedural Status, Control Status, Unknown Status, Fault Log Entry Number and Fault Log Clear.
It displays: Operational State, Usage State, Alarm Status, Availability Status, Standby Status, Log Max Num Entries and Fault Log Data.
It contains a page button to: Alarm Page.
Components
This page contains information about the components in the device.
It displays the tables: Platform Table, Module Table, Port Table and Mod Channel Table.
Chassis
This page contains information about the chassis.
It displays the table: Chassis Power Supply Table.
Web Interface
This page directly displays the devices Web Interface.
Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.