Moxa ioLogik E4200

The Moxa ioLogik E4200 protocol sets and configures the modules the Moxa ioLogik E4200 I/O contact interface device.

About

The connector displays each individual module of the device in a list. Its inputs are visible, as well as its outputs, should there be any. There is also an overview table for all inputs and outputs.

The connector uses SNMP to get this data.

Version Info

Range	Key Features	Based on	System Impact
1.0.0.x [SLC Main]	Initial version	-	-

Product Info

Range	Supported Firmware
1.0.0.x	V1.5 Build 14011615

System Info

Range	DCF Integration	Cassandra Compliant	Linked Components	Exported Components
1.0.0.x	No	Yes	-	-

Installation and configuration

Creation

SNMP Main Connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

• IP address/host: The polling IP of the device, e.g. 10.11.12.13.
• Device address: Not used.

SNMP Settings:

• Port number: The port of the connected device, by default 161.
• Get community string: The community string in order to read from the device. The default value is public.
• Set community string: The community string in order to set to the device. The default value is private.

Usage

General

The General page contains general information about the device, such as Server Model, System Live Time, Firmware Version, Total Number Of Modules.

Config

The config page is used to import descriptions.

Module 1-15

The Modules pages contains the Input Table and Output Table of a single module. It also contains several configuration parameters for each module.

Module Overview

This page contains an overview of all the Input and Output values. These tables can be enabled by enabling a toggle button.

Web Interface

The Web Interface page links the protocol with the device.

Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.