NEC iPASOLINK VR x
The iPASOLINK VRx is used as microwave and optical transporter equipment. This connector allows you to monitor this equipment via SNMP.
About
Version Info
| Range | Description | DCF Integration | Cassandra Compliant |
|---|---|---|---|
| 1.0.0.x [Obsolete] | Initial version. | No | Yes |
| 1.0.1.x [Obsolete] | Metering stats overhaul. | No | Yes |
| 1.0.2.x [Obsolete] | Upgraded to SNMPv2. | No | Yes |
| 1.0.3.x [SLC Main] | Fixed display keys. | No | Yes |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x - 1.0.3.x | 04.01.14 |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- IP port: The IP port of the device.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
Usage
General
This page displays basic system information such as the PM Type, Primary Address, and Equipment Type/Configuration, as well as tables with information on maintenance, events, and traps.
Cards
On this page, a tree control displays all installed cards along with their status.
IDU and ODU
Two tree controls are used to display inventory information of the ODU and the MDU.
Provisioning
This page contains information related to the PTP Clock.
Alarm/AIS Setting
This page shows all alarms and status information of the ODU and the MDU monitor and control item.
Metering
This page displays measurement information of the ODU and the MDU, such as TX Power and RX Power.
PMON/RMON Report
This page contains performance monitoring information of the network equipment, such as the MAX hold and MIN RX level, as well as remote network monitoring information.
In addition, the following summary statuses of the equipment are displayed: Link Performance Monitor (PMON), Remote Network Monitor (RMON), ODU, Ctrl Card, etc.
Configuration
This page displays the basic system configuration of the equipment.
Network Management Setting
This page contains the interface information to connect the network (manager) for the agent (NE), such as the neighbor NE connection, the iPASONLINK VR x NE ports, and the network protocol configuration, such as SNMP.
Maintenance Control
This page displays the OAM capabilities of the interface (loopback control) and RSTP/MSTP control.
Web Interface
This page displays the web interface of the device. The client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.
Notes
When a table has a display key with numbers separated with a forward slash ("/"), the following format is used: slot/port/path.