Network Technologies Inc Enviromux-16D
The Network Technologies Inc Enviromux-16D connector can be used to monitor critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion and smoke. The connector can also be used to configure the network settings.
The system includes three internal sensors: temperature, humidity and power. It also supports 16 external configurable sensors, 8 digital input sensors, and 4 output relays for the control of external devices.
About
This connector provides an overview of the internal, external and auxiliary sensors, the digital inputs and the statuses of the output relays, power supplies, etc.
An SNMP connection is used in order to successfully retrieve and configure the information of the device.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.56 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
- Device address: Not required.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General
This page displays the System parameters and the Firmware Version. Via page buttons, you can view additional information on the Smoke Detectors, Remote Inputs/Relays, etc.
Sensors
This page displays information on the Internal Sensors, the Auxiliary Sensors and the External Sensors. Page buttons provide access to information on the External Sensors ACLM, TAC Sensors and Auxiliary 2 Sensors.
Digital Inputs
This page displays data related to the digital inputs
IP Devices
This page displays data related to the IP devices.
IP Sensors
This page displays data related to the IP sensors.
Output Relays
This page displays the statuses of the output relays.
Power Supplies
This page displays the statuses of the power supplies.
Smart Alerts
This page displays the Events and Smart Alerts tables.
Network Configuration
On this page, you can configure the settings for IPv4, IPv6 and VLAN.
Web Interface
This page displays the web interface of the device. The web interface is only accessible when the client machine has network access to the product.