Nevion SDI Router
The Nevion SDI Router is a modular router that can vary in size depending on how many cards are installed.
About
This connector is used to monitor the Nevion SDI Modular Router.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2.6.27.10-nw1-svn24861 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
Installation and configuration
Creation
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device, e.g., 172.32.65.38.
SNMP Settings:
- Port number: The UDP port, by default 161.
- Get community string: The community string used when reading values from the device, by default public.
- Set community string: The community string used when setting values on the device, by default private.
Usage
General
This page displays system parameters and the System OR Table.
Crosspoints
This page displays the Crosspoint table. It also contains three page buttons to the Level Output Table, Level Input Table and Level Table.
Alarm
This page displays the Alarm table, which lists all alarms.
Module
This page displays three tables: Fan Table, Voltage Table and Temperature Table. There are also four page buttons at the top of the page, which can be used to view the Monitor Table, Reclocker Table, Cable EQ Table and Module Table.
Web Interface Page
On this page, you can access the web interface of the device. Note that the client machine has to be able to access the device, as otherwise it will not be possible to open the web interface.