Nevion Virtuoso CP4400
This is a DataMiner connector for the Nevion Virtuoso CP4400, a device for the processing and handling of MPEG transport streams.
About
This SNMP connector is used to monitor and configure the Nevion Virtuoso CP4400.
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
| 1.0.1.x | New HTTP connection | 1.0.0.2 | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | TBD |
| 1.0.1.x | 2.8.70 |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | No | Yes | - | - |
| 1.0.1.x | No | Yes | - | - |
Configuration
Connections
SNMP Main Connection
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
SNMP Settings:
- Get community string: The community string used when reading values from the device (default: public).
- Set community string: The community string used when setting values on the device (default: private).
HTTP Connection (Range 1.0.1.x)
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination (default: 80).
- Device address: The bus address of the device. If the proxy server has to be bypassed, specify BypassProxy.
Initialization
No extra configuration is needed.
Redundancy
There is no redundancy defined.
Web Interface
The web interface is only accessible when the client machine has network access to the product.
How to use
General
This page allows the monitoring and configuration of basic information related to the device, such as the System Description and System Name.
Device Status
This page allows the monitoring and configuration of the status information regarding ASI and Ethernet interfaces, by means of a tree view. Other interfaces can also be found on this page, e.g., Ref Sync Input, but no additional information is provided on these.
The page also contains page buttons to the following subpages:
- Ethernet: Contains all the tables related to Ethernet interfaces used in the tree view.
- ASI Inputs: Contains all the tables related to ASI input interfaces used in the tree view.
- ASI Outputs: Contains all the tables related to ASI output interfaces used in the tree view.
Alarms
This page allows the monitoring of all active alarms on the device provided by the system itself.
It also contains a page button, Alarms Log, which displays a table with the log of all the alarms. As this can be a very large table, the Polling Status toggle button allows you to enable/disable its polling.
Alarms (Range 1.0.1.x)
In range 1.0.1.x, the information about the Active Alarms was moved to a subpage and a table for the Current Alarms was added on the main page.
Chassis Config
This page allows the monitoring of information regarding the physical cards available on the device. It also allows the configuration of the mode for each available interface.
Time Settings
This page allows the monitoring and configuration of time-related information, including the SNTP Time Source.
It also contains a page button, Leap Seconds, that allows the monitoring and configuration of the information regarding leap seconds.
TXP Settings
This page allows the monitoring and configuration of the information regarding the TXP configuration.
SNMP Settings
This page allows the monitoring and configuration of the information regarding the SNMP configuration, as well as the SNMP trap servers.
Maintenance
This page allows the monitoring of basic information regarding device physical cards.
Users
This page allows the monitoring of basic information regarding stored sessions of users.
Switches (Range 1.0.1.x)
This page displays information about the unit Switches and the Switch Inputs.
Seamless Switches (Range 1.0.1.x)
This page displays information about the unit Seamless Switches and Seamless Switch Inputs.
Network
This page allows the monitoring and configuration of network information regarding all Ethernet interfaces, by means of a tree view.
The page also contains page buttons to the following pages:
- IP Interfaces: Contains all the tables used in the tree view.
- IP Routes: Contains the table regarding the static IPv4 configured routes.
- IP Snooping: Contains all the tables and status parameters related to the snooping capability provided by the device.
- IP Ping: Contains all the information regarding the running ping actions (Manual and Channel pings).
Connect (Range 1.0.1.x)
On this page, you can set up the Credentials and the Authentication Method for the HTTP connection.