Table of Contents

Newtec M6100R2

This connector allows you to monitor and configure the Newtec M6100R2 broadcast satellite modulator. Communication with the device happens via SNMP.

About

Version Info

Range Key Features Based on System Impact
1.0.0.x [SLC Main] Initial version - -

Product Info

Range Supported Firmware
1.0.0.x 2.1.58.71682

System Info

Range DCF Integration Cassandra Compliant Linked Components Exported Components
1.0.0.x No Yes - -

Configuration

Connections

SNMP Main Connection

This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:

SNMP CONNECTION:

  • IP address/host: The polling IP of the device.

SNMP Settings:

  • IP port: The IP port of the device.
  • Get community string: The community string used when reading values from the device (default: public).
  • Set community string: The community string used when setting values on the device (default: private).

Web Interface

The web interface is only accessible when the client machine has network access to the product.

How to use

The element consists of the data pages detailed below.

General

This page displays general information about the modem, such as the Firmware Version, OS Version and HW Product Type.

The following subpages are available:

  • Info Destination: Contains a table with notifications of the destination.
  • Remote Log: Contains information and settings related to the log filter.
  • Reference Clock: Contains information about the reference clock.
  • CLI/GUI/FTP: Contains settings related to the graphical user interface, client user interface and file transfer protocol.
  • Operator: Contains information and settings related to the operator.
  • Power Supply Failure: Displays alarms related to the power supply.
  • Redundancy: Contains information and settings related to redundancy.
  • Converter Alarm: Displays alarms relating to the converter.
  • Device NTP Peer: Contains a table with the Device NTP Peer addresses.
  • Device Sensors: Contains information provided by the sensors, such as temperature and voltage.
  • Device Options: Displays options of the device, with the sales code and corresponding description.

TS Over IP Outputs

This page contains information related to the transport stream over IP, including monitoring information, and allows you to configure outputs and inputs.

The following subpages are available:

  • Input Alarms: Contains information related to the alarms of the TS Over IP inputs.
  • Ethernet Link Management: Allows you to configure the connections.
  • Outputs Alarms: Contains information related to the alarms of the TS over IP outputs.

TS Miscellaneous

This page contains page buttons to the following subpages:

  • Protocol TS: Contains information and settings related to the input alarms.
  • BISS: Contains information about the scrambling monitoring, alarm information and settings for the BISS.
  • TS Rate: Contains information and settings related to the TS rate.
  • TS Analyser: Contains information and settings related to the TS analyser.
  • TS Signaling: Contains information and settings related to the TS signaling.

Alarms

This page displays general alarms related to the device.

The following subpages are available:

  • Configuration: Allows you to configure the alarm settings.
  • Definition/History/Log: Displays alarms related to the definition, log and history.

IP Functionality

This page allows you to configure the data interface and gateway. On the Configuration IP Functionality subpage, you can configure routes and IP interfaces.

Ethernet Interface

This page displays general information about Ethernet interfaces.

The following subpages are available:

  • Management/Data: Allows you to configure the Ethernet interfaces.
  • Configuration/Redundancy/Link/Monitorization/Alarms: Displays alarm status information for the Ethernet interfaces, as well as various settings, e.g., related to redundancy and VLANs.

ASI In Out

This page allows you to configure and monitor the ASI inputs and outputs.

The following subpages are available:

  • ASI Input: Displays the alarms related to the inputs of the ASI.
  • ASI Connection Config: Allows you to configure the ASI connections.
  • ASI Output Status: Displays the alarms related to the outputs of the ASI.

Multi Demodulator

This page displays the alarms relating to the multi demodulator. On the Multi Demodulator Config subpage, you can monitor multiple settings for the multi demodulator.

Multiple Stream TS In Out

This page allows you to monitor and configure the TS multi stream.

The following subpages are available:

  • Multi Stream Input Alarms: Displays the alarms related to the inputs.
  • Multi Stream Config: Allows you to configure the outputs.
  • DVB Config: Allows you to configure the outputs for DVB-S2.
  • S2 Extensions: Contains extra settings.
  • Modulation Types and FEC: Allows you to configure the modulation types and FEC for AMC and NBC.
  • Out Alarm Status: Displays the alarms related to the outputs.

DVB Modulators

This page allows you to monitor and configure the modulators.

The following subpages are available:

  • Extra Monitoring: Allows extra monitoring of the modulators.
  • DVB Modulator Alarms: Displays the alarms of the DVB modulators.

IP MPE Encapsulation - Decapsulation

This page displays tables related to the IP MPE encapsulation and decapsulation, and the corresponding alarms.

Configurations

This page allows you to boot, load, save or delete configurations.

Improve this page