Novelsat NS3000
This is an SNMP connector for the Novelsat NS3000 device. It can be used to display and configure information from the modem.
The connector needs an SNMP connection to retrieve and set information on the device.
about
Version Info
| Range | Key Features | Based on | System Impact |
|---|---|---|---|
| 1.0.0.x [SLC Main] | Initial version | - | - |
Product Info
| Range | Supported Firmware |
|---|---|
| 1.0.0.x | 2011.3 (Build 4377) |
System Info
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---|---|---|---|---|
| 1.0.0.x | Yes | Yes | - | - |
Configuration
Connections
SNMP Connection - Main
This connector uses a Simple Network Management Protocol (SNMP) connection and requires the following input during element creation:
SNMP CONNECTION:
- IP address/host: The polling IP of the device.
SNMP Settings:
- Port number: The port of the connected device, by default 161.
- Get community string: The community string used when reading values from the device, by default: public.
- Set community string: The community string used when setting values on the device, by default: private.
HTTP Connection - Secondary
This connector uses an HTTP connection and requires the following input during element creation:
HTTP CONNECTION:
- IP address/host: The polling IP or URL of the destination.
- IP port: The IP port of the destination.
- Bus address: If the proxy server has to be bypassed, specify bypassproxy.
Usage
System
This page displays general information about the device like the firmware version, os version, ...
Here you can also update your software from the device.
System Config
Here you find settings for the external electrical connections to/from the device for the Ethernet Interface, Serial Interface, External Clock Input and additional settings for the Time & Date Reference used by the Device. This page also allows the user to load, save and delete device configurations from the devices internal System Database.
Modulator Line Config
On this page you will find current values for Line Configuration parameters specific to Modulator Functionality.
User Changeable parameters will include Command Regions for changes and updates to be applied.
Modulator Channel Config
Here is 1 table available with the channel information, this table is also configurable.
- Modulator Channel Table
Modulator Interface Config
On this page are 3 tables displayed that are related to interface of the modulator, with these 3 you can change the settings of the interface table of the device.
- Modulator Interface Test Table
- Modulator Interface ASI Table
- Modulator Ethernet Interface Table
- Modulator GigE Interface Table
Modulator CID Config
This page allows the configuration of several Caller ID (CID) parameters.
Modulator AUPC Config
This page contains the Automatic Uplink Power Control (AUPC) parameters.
Demodulator Line Config
On this page you will find current values for Line Configuration parameters specific to Demodulator functionality.
User Changeable parameters will include Command Regions for changes and updates to be applied.
Demodulator Channel Config
Here you find 4 parameters where you can configure the demodulator channel 1 and 2 range for ISI by defining their Lower Limit (From) and Upper Limit (To) values.
Demodulator Interface Config
This page is the same as the Modulator Interface Config page but now it's for the demodulator.
- Demodulator Interface Test Table
- Demodulator Interface ASI Table
- Demodulator Ethernet Interface Table
Modulator Interface Monitoring
On this page there is 1 table:
- Modulator Interface Table
Modulator Ethernet Monitoring
There is also 1 Table on this page:
- Modulator Ethernet Table
Modulator System Monitoring
Here you find 2 parameters about the modulator system: Board Temperature and Clock Source.
Modulator ACM Monitoring
This page contains a table that monitors several Adaptive Coding and Modulation (ACM) parameters. At the bottom of the page, there is a button that allows the table to be cleared.
Modulator AUPC Monitoring
This page contains multiple AUPC values that are being monitored.
Demodulator Line Monitoring
This page displays a lot of information about the demodulator line, in the bottom right corner there is a button to reset the counters.
Demodulator Interface Monitoring
This page contains 2 tables:
- Demodulator Interface Table
- Demodulator Ethernet Table
Demodulator System Monitoring
Here you find the temperature of the FPGA and the Board, here is also the Clock source displayed.
Alarm / Event Monitoring
Here are 2 tables displayed:
- Monitor Alarm Table
- Monitor Event Table
Web Interface
If available, provides access via a Web Interface (http:// Port 80) into the specific device instance.
Note: May only be available when accessing from the actual DataMiner DMA (Not all Clients).
May also require additional entry of Access Credentials (User Name/Password).